| PART |
Description |
Maker |
| CP9288 |
Drill
|
CHICAGO PNEUMATIC
|
| 25AA640T-I/SN 25AA640-I/ST 25AA640-I/P 25LC640X-E/ |
Evaluation Kit for the MAX1715
Evaluation Kit for the MAX1879
Evaluation Kit for the MAX1864
3µs, 12-Bit ADC
Evaluation Kit for the MAX1717
Notebook CPU Step-Down Controller for Intel Mobile Voltage Positioning (IMVP-II) SPI串行EEPROM
|
Luxo, Corp.
|
| KFX0414T |
900MHz Cordless Phone
SPECIFICATIONS FOR SAW DUPLEXER (RF DUPLEXER FOR CORDLESS PHONE CIS)
|
Korea Electronics (KEC)
KEC[KEC(Korea Electronics)]
KEC Holdings
|
| EV42-160-22-SERIES EV44-100-22-SERIES EV44-160-22- |
TLC2555 Evaluation Module
TLC4545 Evaluation Module
TLC2551 Evaluation Module
CC1000DK-868/915 MHz Development Kit
CC2400DK Development Kit
TPA0172 Evaluation Module
Radiomodem 433 MHz
CC2400DBK Demonstration Board Kit
CC1000PP 433 MHz Plug and Play Module
Digital Data Capture and Analysis for High Speed, High Resolution A to D Converters
ADS1244 Evaluation Module
SN65HVD22EVM Evaluation Module
Peripheral IC 外围芯片
|
Infineon Technologies AG
NXP Semiconductors N.V.
Amphenol, Corp.
Xicon Passive Components
Electronic Theatre Controls, Inc.
|
| 25C320-E/ST 25C320T-/ST 25LC320T-/ST 25C320-/P 25C |
CMOS, 10-Bit A/D Converter with Track and Hold
Evaluation Kit for the MAX1858, MAX1875, MAX1876
Dual, High-Efficiency, Step-Down Converter with Backup Battery Switchover
Evaluation Kit for the MAX1774
SPI Serial EEPROM
Evaluation Kit for the MAX1846, MAX1847
3µs, 12-Bit ADC
Evaluation Kit for the MAX1776 SPI串行EEPROM
|
Microchip Technology, Inc.
|
| 2200173 |
Additional labeling of PCB with Phoenix Contact PMB module marker carrier (drill hole diameter 4 mm)
|
PHOENIX CONTACT
|
| 155-1077 |
Wire Wrap Pin - 2 Wrap, Turned, .055 (1,40) Mounting Hole (#54 Drill)
|
CAMBION Electronic Components
|
| 155-3867 |
Wire Wrap Pin - 2 wrap, Turned, .055 (1,40) Mounting Hole (#54 Drill)
|
CAMBION Electronic Components
|
| MB81N643289 |
DRILL BIT HIGH SPEED STEEL .021,1
8 x 256K x 32 BIT DOUBLE DATA RATE FCRAMTM
|
Fujitsu Limited
Fujitsu Component Limited.
|
